I don't have pictures of me cutting the windows out because I was so excited to get the holes cut out. I put 3 windows on each side. I didn't put 4 windows on the sides because my marine battery is on one side and I put a 12 gallon water tank on the other side.
This is an inside pic of the roof. I have 8 windows on the roof. I now have to add some framing to the roof to support the windows now. I didn't put windows in the top part of the walls so I can keep my lights hooked up and run more wiring to the exhaust fan which will be on the top right on the side wall.
The exhaust outlet above the last window.
Peering inside the greenhouse looking up.
I put a window in the back door. I tried using my new greenhouse with some small plants but it got so hot and I didn't have the fans installed and they burned up. I just need to attach a screen and its ready to go.
This is the window I put on the front of the trailer. Now when I travel with the greenhouse, I can look in my rear view mirror and see the car behind me.
This is the spot where my exhaust fan will be going.
First, I used a 12 gallon barrel and cut the top off. I used the lid to house the fans.
This is the fan mount with the holes cut out of the lid.
I chose to use some 12 volt computer fans to be my exhaust. They run on little power and with seven of them, it will be more than enough fans to do the job.
This is my finished exhaust fan setup, wired up. I used Elmer's glue to cover the wires and make it presentable.